Common Errors : Sam Broadcast

110 - Unable to connect to xx.xxx.xxx.xxx:1221. Station might be offline. Connection timed out (110).
What IP did you put in your config.html file?
Go on What is My IP Address to find out your IP, and then put whatever it says your IP is in the config file where it says "yourIP", also replace "$ $" with your IP. Finally, update your web request file.

10050 - Unknown Error

10054 - Disconnected
On resetting, your stream will show up this error. Restart and wait about 1 or 2 minutes.
Try to shut down SAM and SHOUTcast server and restart.

10060 - Not connecting to stream host
Is the IP address prefixed with HTTP:
If so, please remove that.
Are outgoing connections allowed by the SAM computer?
I changed my NIC to wired, and for some reason, my router (which is firewalled) changed my internal IP address. As such, the ports weren't forwarded.
10060 and 10061 are problems with the server being down, connection refused, bad password, bad IP, or bad gateway.
Please verify:
1) The DNAS is running
2) The password you have is correct (verify by logging into the DNAS admin)
3) The DNAS is not already sourced
4) The encoder has no http:// or other protocol prefix
5) Outgoing connections from SAM to the server are allowed.

10061 - You can't connect
This is a connect error code, not all that unusual for Audiorealm and Spacialnet
10060 and 10061 are problems with the server being down, connection refused, bad password, bad IP, or bad gateway.
Please verify:
1) The DNAS is running
2) The password you have is correct (verify by logging into the DNAS admin)
3) The DNAS is not already sourced
4) The encoder has no http:// or other protocol prefix
5) Outgoing connections from SAM to the server are allowed.

10065 - Disconnected
Your cable or Internet is unplugged from your system.

11004 - Connection Failed (11004: 500 No Data (winsock error #11004))
Check your cables or that you have a connection to the internet

200 - requests - Touch OK
Like it said, everything is good don't get greedy!

401 - Error retrieving xml document (Unauthorized)
This error is because your password is incorrect for the ShoutCAST Server.
Check your password in the ShoutCast "Edit Config"

404 -
Error retrieving xml document (Connection timed out error #10060)
Error retrieving xml cant connect no error
This error is caused by your modem (cable or dsl) not supporting local loopback. Here is a work around:
Step 1. Get a FREE static named address from www.no-ip.com[[http://www.no-ip.com/|]] example: ucartzradioserver.com
Step 2. Create a no-ip.com A record using that redirect pointing to the IP of the machine hosting SAM. (public IP address).
Step 3. Download the DUC client from no-ip.com and install it on the PC with SAM.
Step 4. Insert the following in the hosts file in computer with SAM. The hosts file has no extension and is different from lmhosts and is usually located here c:\windows\system32\drivers\etc\hosts. insert this line "127.0.0.1 ucartzradioserver.com" Be sure to re-save the file without an extension.
Step 5. Place http://ucartzradioserver.com in the Hosts box in your statistic relay config. This 'should' allow your statistics relay to begin working properly, it make take a song change or two to work correctly.

408 - Request time-out

500 - At least one relay is using a local network IP address. Please use an internet IP address
You could have entered your LAN IP address in your statistic relay and it needs a public IP address to function properly.

504 - Gateway time-out

600 - Requested song is offline and can not be played

601 - Member username/password invalid.
It not concerned

601 - requests - Song recently played
Listener may not request this song as it has played. It will brake your set rules to play at this time.

602 - requests - Artist recently played
Listener may not request this song as it has played. It will brake your set rules to play at this time.

603 - requests - Song already in queue to be played
Listener may not request this song as it will play shortly.

604 - requests - Artist already in queue to be played.
Listener may not request this song as it has or will play shortly.

605 - requests - Invalid station ID

605 - requests - Song already in request list
Listener may not request this song as it has or will play shortly.

606 - requests - Artist already in request list.
Listener may not request this song as it has or will play shortly.

608 - all current relays are invalid for subscription
Question:
I keep getting this error. "Error 608 - all current relays are invalid for subscription. Please contact audiorealm for more information."
What do I need to do?
Answer:
You signed up your station for AR Choice subscription. You MUST use the WMA relays we provide to stream your station, any other servers or relays will be ignored by our system

609 - requests - Track recently played
This error is so special even Spacial doesn't know

610 - requests - Guests can only request (1) song per hour. To avoid this message, please register and or log in.
In sam set the limits in the config area under requests.

611 - requests - Sorry, you can only request (5) songs per hour.
In sam set the limits in the config area under requests.

612 - requests - Sorry, you can only request a maximum of (15) songs in any (24) hour period.
In sam set the limits in the config area under requests.

613 - requests - Sorry, on Tuesdays, you can only request a maximum of (2) songs per hour.
In sam set the limits in the config area under requests.

614 - requests - Sorry, on Tuesdays you can only request a maximum of (25) songs in the last (24) hour period.
In sam set the limits in the config area under requests.

  • 0 Корисниците го најдоа ова како корисно
Дали Ви помогна овој одговор?

Понудени резултати

How Do I Setup a Shoutcast Statistic Relay?

Statistic Relay WHMsonic Users In the Statistic Relays window click on the '[+]' button...

How Can I Delete The Track (Music) History In SAMS Broadcaster?

You can clear the Track History by clicking Tools --> Maintenance --> Clear History.   As...

How do I set up an encoder in SAM broadcaster?

How to Set Up Your Windows Media (WMA) Encoder The WMA encoder is popular because any computer...

I'm using SAM Broadcaster and the encoder is connecting fine, but no one can hear the music from the stream?

If you are connecting (encoding) you need to make use the DSP (to use Select Audio DSP Pipeline...

What is the minimum system requirements, for the installation SAM Broadcaster?

The first thing you need to do is make sure you’re set up with these minimum system requirements:...